Cork itself is a very dense product and is designed to withstand commercial traffic.
Cork has a lot of memory due to the air cells and recovers well from most objects. Like any floor, cork can be punctured by sharp objects and damaged by furniture feet. It is recommended that furniture with sharp or damaged legs have protective pads placed on them
| Material: | 100% Natural Cork on Surface & Bottom Layer High Density (MDF) 6mm or Center Layer |
| Installation: | 36 x 12 approx. (900 mm x 300 mm) |
| Total Thickness: | 7/16 approx. (11mm) |
| Surface Layer Thickness: | 3.2mm |
| Weight: | 32 lbs. per carton |
| Carton: | 21 sq. ft./ 7 planks |
| Surface Finish: | 3 Coats Flexible Acrylic Matte Varnish |
LENGTH:
Property: < 600 mm +/- 0.3 mm
Property: > 600 mm =/- 1.0 mm
Property: > 600 mm =/- 1.0 mm
WIDTH:
+/-0.25 mm
THICKNESS:
+/-0.25 mm
DENSITY OF AGGLOMERATED CORK WEAR LAYER:
> 450 Kg/m3
MOISTURE CONTENT:
< 8% max
BEHAVIOR OF THE BONDING:
There Shall be No Delamination At All
COMPRESSION (ISO Norm 9148):
(%) 40/60
RECOVERY:
(%) 50
HIGH DENSITY FIBERBOARD:
> 800 Kg/m3
WEAR RESISTANCE (Loss Weight):
3.6 MG/100 CICLOS
SQUARENESS:
< 0.3 mm
STRAIGHTNESS:
< 0.3 mm
FLAMMABILTY:
(Hardwood, Plywood,Veneer Association) Average Critical Radiant Flux 0.60 w/cm2
